Swap tokens and bridge assets

What you’ll build:

Get swap quotes from multiple liquidity sources in a single call
Receive ready-to-sign approve and swap transactions without separate quote/execute steps
Bridge assets across chains (EVM ↔ EVM, EVM ↔ Solana)

Swap 0.05 ETH → DAI on Ethereum

  Quote 1 (Relay):
    Output:           128.45 DAI
    Min after slip:   125.88 DAI
    Net of fees:      $128.10
    ✅ Transaction ready to sign

  Quote 2 (LI.FI):
    Output:           128.12 DAI
    Min after slip:   125.56 DAI
    Net of fees:      $127.78
    ✅ Transaction ready to sign

Time: ~15 minutes

Prerequisites

A Zerion API key (get one here)
A wallet address with tokens to swap

How it works

Unlike most swap APIs that require separate quote and execute endpoints, Zerion API combines both into a single call:

Call GET /v1/swap/quotes/ with the sender, recipient, input asset, output asset, and amount
Receive multiple quotes. Each includes the expected output, fees, and (when executable) ready-to-sign transaction_approve and transaction_swap payloads
Pick a quote and sign the transactions with your wallet

The API returns quotes best-first, sorted by the fiat value of output_amount_after_fees.

Get swap quotes

Use the swap and bridge quotes endpoint.

const API_KEY = process.env.ZERION_API_KEY;
const headers = {
  accept: "application/json",
  authorization: `Basic ${btoa(API_KEY + ":")}`,
};

// Swap 0.05 ETH → DAI on Ethereum
const wallet = "0xAb5801a7D398351b8bE11C439e05C5B3259aeC9B";
const params = new URLSearchParams({
  from: wallet,
  to: wallet,
  "input[chain_id]": "ethereum",
  "input[fungible_id]": "eth",
  "input[amount]": "0.05", // human-readable decimal, not wei
  "output[fungible_id]": "0x6B175474E89094C44Da98b954EedeAC495271d0F", // DAI
});

const response = await fetch(
  `https://api.zerion.io/v1/swap/quotes/?${params}`,
  { headers }
);
const { data } = await response.json();

for (const quote of data) {
  const {
    liquidity_source,
    output_amount,
    minimum_output_amount,
    output_amount_after_fees,
    network_fee,
    error,
  } = quote.attributes;
  console.log(`\nQuote from ${liquidity_source.name}:`);
  console.log(`  Output:         ${output_amount.quantity}`);
  console.log(`  Min after slip: ${minimum_output_amount.quantity}`);
  console.log(`  Net of fees:    ${output_amount_after_fees.value} ${output_amount_after_fees.currency ?? ""}`);
  console.log(`  Network fee:    ${network_fee?.amount?.value ?? "n/a"}`);
  if (error) console.log(`  ⚠️  ${error.code}: ${error.message ?? error.hint}`);
}

import os, requests

api_key = os.environ["ZERION_API_KEY"]
wallet = "0xAb5801a7D398351b8bE11C439e05C5B3259aeC9B"

# Swap 0.05 ETH → DAI on Ethereum
response = requests.get(
    "https://api.zerion.io/v1/swap/quotes/",
    params={
        "from": wallet,
        "to": wallet,
        "input[chain_id]": "ethereum",
        "input[fungible_id]": "eth",
        "input[amount]": "0.05",  # human-readable decimal, not wei
        "output[fungible_id]": "0x6B175474E89094C44Da98b954EedeAC495271d0F",  # DAI
    },
    auth=(api_key, ""),
)

for quote in response.json()["data"]:
    attrs = quote["attributes"]
    print(f"\nQuote from {attrs['liquidity_source']['name']}:")
    print(f"  Output:         {attrs['output_amount']['quantity']}")
    print(f"  Min after slip: {attrs['minimum_output_amount']['quantity']}")
    after_fees = attrs["output_amount_after_fees"]
    print(f"  Net of fees:    {after_fees.get('value')} {after_fees.get('currency', '')}")
    if "error" in attrs:
        err = attrs["error"]
        print(f"  Note: {err['code']} - {err.get('message') or err['hint']}")

curl -g -u "YOUR_API_KEY:" \
  "https://api.zerion.io/v1/swap/quotes/?from=0xAb5801a7D398351b8bE11C439e05C5B3259aeC9B&to=0xAb5801a7D398351b8bE11C439e05C5B3259aeC9B&input[chain_id]=ethereum&input[fungible_id]=eth&input[amount]=0.05&output[fungible_id]=0x6B175474E89094C44Da98b954EedeAC495271d0F"

Each quote includes:

liquidity_source - provider id, display name, and icon
input_amount / output_amount - what you’re sending and the estimated amount you’ll receive before slippage (quantity is the human-readable decimal; value / usd_value are fiat conversions when available)
minimum_output_amount - guaranteed output after slippage
output_amount_after_fees - net output once protocol, bridge, and network fees are subtracted; this is the field quotes are ranked by
slippage_percent - actual slippage applied (the slippage_percent query parameter when provided, otherwise auto-chosen)
protocol_fee / bridge_fee / network_fee - fee breakdown; each carries amount and an included_in_rate flag (whether already deducted from the rate)
transaction_approve - ERC-20 approve transaction to sign first. Absent when not needed (Solana, EVM native-asset input, or sufficient allowance already granted)
transaction_swap - swap transaction to sign. Absent when the quote is informational only (e.g., error is set)
error - present when the quote can’t be executed as-is (e.g., not_enough_input_asset_balance)
estimated_time_seconds - typically present on bridge routes

Pick a quote and check for errors

The API returns quotes best-first. Before signing, check whether the chosen quote has an error and a transaction_swap.

const quote = data[0]; // best by output_amount_after_fees
const { error, transaction_approve, transaction_swap } = quote.attributes;

if (error) {
  console.log(`Cannot execute: ${error.code} (hint: ${error.hint})`);
  process.exit(1);
}
if (!transaction_swap) {
  console.log("No transaction payload - informational quote only");
  process.exit(1);
}

error.hint is a machine-readable next step (topup, increase_input_amount, unspecified) you can surface in your UI to guide the user.

Sign the approve transaction (if present)

If transaction_approve is present, sign and confirm it before submitting the swap. It’s a complete EVM transaction, so you don’t need a manual approve(spender, amount) call.

import { ethers } from "ethers";

const provider = new ethers.JsonRpcProvider(process.env.RPC_URL);
const signer = new ethers.Wallet(process.env.PRIVATE_KEY, provider);

async function sendEVM(payload) {
  // EVM numeric fields are hex strings - ethers accepts them directly
  const tx = await signer.sendTransaction({
    type: parseInt(payload.type, 16),
    to: payload.to,
    data: payload.data,
    value: payload.value,
    gasLimit: payload.gas,
    nonce: parseInt(payload.nonce, 16),
    chainId: parseInt(payload.chain_id, 16),
    ...(payload.max_fee
      ? { maxFeePerGas: payload.max_fee, maxPriorityFeePerGas: payload.max_priority_fee }
      : { gasPrice: payload.gas_price }),
  });
  return tx.wait();
}

if (transaction_approve?.evm) {
  console.log("Sending approval...");
  await sendEVM(transaction_approve.evm);
  console.log("Approval confirmed");
}

transaction_approve is omitted for Solana, for EVM swaps where the input is the chain’s native asset (ETH, MATIC, etc.), and when the wallet already has sufficient allowance.

Sign and send the swap transaction

const receipt = await sendEVM(transaction_swap.evm);
console.log(`Confirmed in block ${receipt.blockNumber}`);

For Solana quotes, transaction_swap.solana.raw is a base64-encoded raw transaction that you decode and sign with the Solana wallet of your choice (e.g., @solana/web3.js).

Bridge assets across chains

To bridge tokens between chains, set a different output[chain_id]. The to parameter is the recipient on the destination chain. Set it to your wallet on that chain (use a base58 Solana address when bridging to Solana).

# Bridge 1 USDC from Ethereum to Polygon
curl -g -u "YOUR_API_KEY:" \
  "https://api.zerion.io/v1/swap/quotes/?from=YOUR_WALLET&to=YOUR_WALLET&input[chain_id]=ethereum&input[fungible_id]=0xA0b86991c6218b36c1d19D4a2e9Eb0cE3606eB48&input[amount]=1&output[chain_id]=polygon&output[fungible_id]=0x3c499c542cEF5E3811e1192ce70d8cC03d5c3359"

Use the List fungibles available for bridging endpoint to discover which tokens can be bridged between two specific chains before requesting quotes.

Key parameters

Parameter	Description
`from`	Wallet performing the swap. Must match the chain type of `input[chain_id]` (EVM hex or Solana base58). Required.
`to`	Recipient of the output asset. Must match the chain type of `output[chain_id]`. For a same-chain swap to the same wallet, set equal to `from`. Required.
`input[chain_id]`	Source chain (e.g., `ethereum`, `polygon`, `solana`). Required.
`input[fungible_id]`	Input asset’s fungible ID - either a Zerion fungible ID (e.g., `eth`) or the token contract address. Required.
`input[amount]`	Human-readable input amount as a decimal string (e.g., `"0.05"`), not the smallest unit. Required.
`output[chain_id]`	Destination chain. Defaults to `input[chain_id]` (same-chain swap).
`output[fungible_id]`	Output asset’s fungible ID or token contract address. Required.
`slippage_percent`	Maximum acceptable slippage in percent. Auto-chosen when omitted.
`currency`	Currency for fiat values in the response (e.g., `usd`). Defaults to `usd`.

​Prerequisites

​How it works

​Key parameters

Prerequisites

How it works

Key parameters